Weight: 600

MDS Tree Gator

The MDS Tree Gator – Tree and Post Puller is stout. The Abrasion Resistant “working arm” is very heavy duty – making it the focus of this awesome, aggressive tool that will change the way you use your skid steer. Its massive appearance says it all.

The beefy construction makes the MDS Tree Gator the toughest in its class. The clamping force exerted from the hydraulic
cylinder to the tip of the tine is massive; firmly gripping whatever is locked in its jaws.

The aggressive “saw tooth snout” - upright and outer - will cut through branches and stumps with ease and speed.

Shown with optional debris screen

• A full length 1½” greaseable pivot pin

• Heavy duty ⅝” top serrated brush guard

• Concealed, protected 3” x 8” cylinder

• Properly routed 4,000# PSI – sheathed hoses

• ¼” universal skid steer plate welded to ⅜”
- 3” x 5” thick torque tubing on the top and
3.5” x 3.5” on the bottom

• AR400 (abrasion resistant) ¾” heavy
serrated jaws

• Opens to 16” at the very end with integrated
"stop" to prevent over-extending arm and
cylinder – closes to within ⅛” of an inch

Testing has proven the MDS Tree Gator will exceed every expectation. Whether you are pulling out steel fence posts or 8” trees – you will not be disappointed. Backed by the same brand of heavy duty attachments that you have been accustomed to.*

*Testing was performed with a Bobcat S740 Skid Steer with 74hp and 23gpm hydraulic output. Results may vary depending on your machine.

Overall height is 44”. Overall length is 41”. Approximately 600#.